2026-11-20

Threading Inserts vs. Spiral Taps: Which Is Better for Internal Thread Machining?

Choosing between threading inserts and spiral taps affects machining time, thread flexibility, setup requirements, and production cost.

Spiral taps are often efficient for repeated standard blind holes, while internal threading inserts can offer flexibility for larger bores and CNC turning. This guide from STWANG compares both methods using practical machining scenarios and an illustrative cost calculation.

Table of Contents

  1. Key Differences Between Threading Inserts and Spiral Taps
  2. When Should You Choose Internal Threading Inserts?
  3. When Are Spiral Taps More Efficient?
  4. Machining Examples: M6 vs. M30 Internal Threads
  5. How to Compare Cost per Threaded Part
  6. Frequently Asked Questions

1. Key Differences Between Threading Inserts and Spiral Taps

Factor Internal Threading Inserts Spiral Taps
Machining method Single-point threading, typically in multiple passes Multi-edge cutting in a tapping cycle
Common equipment CNC lathe or turning center Machining center, tapping machine, or compatible turning center
Thread diameter Often advantageous for larger internal threads Commonly used for smaller standard threads
Thread flexibility Compatible partial-profile inserts may cover multiple pitches Each tap is made for a specific size and pitch
Cycle time Multiple passes may increase machining time Often shorter for suitable standard threads
Dimensional adjustment CNC tool offsets allow adjustment Primarily determined by tap geometry and cutting conditions
Tool replacement Replaceable insert Replace the tap; some types may be reground
Key limitations Bore clearance and boring-bar rigidity Torque, chip evacuation, and breakage risk

Key takeaway: Spiral taps are often efficient for high-volume standard threads. Internal threading inserts offer flexibility for larger bores, varied specifications, and CNC turning.

2. When Should You Choose Internal Threading Inserts?

Larger internal thread diameters

As diameter increases, large dedicated taps may become more costly. Single-point threading can machine larger threads with a suitable insert and boring bar. Verify minimum bore diameter, tool clearance, and rigidity.

Multiple thread specifications

Some partial-profile threading inserts can machine several pitches within their specified range. Full-profile inserts generally match a particular pitch and thread form. This flexibility can reduce tooling changes in small-batch production.

Thread size adjustment

CNC offsets allow controlled adjustments during single-point threading. This does not mean inserts are always more accurate: either method can meet the required tolerance when correctly applied.

3. When Are Spiral Taps More Efficient?

High-volume standard threads

A tap cuts the thread in a tapping cycle rather than repeated single-point passes, potentially reducing cycle time for standard sizes. Actual results depend on material, depth, and machine capability.

Blind-hole threading

Spiral-flute taps direct chips toward the hole entrance and are commonly considered for blind holes. Confirm tap chamfer, full thread depth, drilled depth, and bottom clearance.

Standardized production

For repeated fixed thread specifications, dedicated taps simplify tool planning. For difficult materials, select suitable tool geometry, substrate, coating, and lubrication.

STWANG offers spiral tap products for different machining needs. Confirm the applicable product grade, material, thread size, and cutting conditions before selection.

4. Machining Examples: M6 vs. M30 Internal Threads

Illustrative scenarios only; these are not verified STWANG application results.

Case 1: M6 × 1.0 Blind Hole in Stainless Steel

A CNC machining center produces repeated M6 × 1.0 blind holes in stainless steel. A spiral-flute tap is a sensible starting point because of its suitability for standard threads and upward chip evacuation. Verify stainless grade, pilot-hole size, thread depth, chamfer, and machine tapping capability.

Case 2: M30 × 3.5 Internal Thread in Steel

A CNC lathe produces small batches of M30 × 3.5 internal threads in steel, with changing thread specifications. An internal threading insert is a sensible starting point because the larger bore may allow boring-bar clearance and CNC-controlled passes. Verify thread form, bar rigidity, runout, and relief space.

Production factor M6 blind hole M30 internal thread
Machine CNC machining center CNC lathe
Production High-volume, repeated Small batches, varied specifications
Initial tool to evaluate Spiral-flute tap Internal threading insert
Main consideration Cycle time and chip evacuation Flexibility and bore clearance
Verify Pilot-hole depth and tap suitability Bar rigidity and thread form

5. How to Compare Cost per Threaded Part

The purchase price of a tool is only part of the cost. Compare cost per accepted threaded hole, including machining, tooling, setup, downtime, and quality losses.

Cost factor What to include
Tooling Purchase price and useful life
Machining Actual cycle time
Machine rate Hourly machine cost
Downtime Tool changes and adjustment
Setup Programming, preparation, and changeover
Quality Inspection, scrap, and rework

Illustrative cost comparison (not measured machining data)

Cost item Threading insert Spiral tap
Tooling allocated per hole US$0.08 US$0.12
Machining time per hole 30 seconds 12 seconds
Machine hourly rate US$60 US$60
Machining cost per hole US$0.50 US$0.20
Direct cost per hole US$0.58 US$0.32

In this simplified example, tapping has the lower direct cost because of its shorter cycle time. Setup, tool failure, scrap, and changeovers may change the result.

Estimated cost per accepted threaded hole = (total tooling + total machining + setup/downtime + quality-related cost) ÷ accepted threaded holes

6. Frequently Asked Questions

Can one threading insert machine different thread pitches?

Some partial-profile inserts support multiple pitches within their stated range. Full-profile inserts are normally specific to one pitch and thread form.

Why might a spiral tap break even if the thread size is correct?

An incorrect pilot hole, inadequate blind-hole clearance, chip accumulation, excessive torque, or poor lubrication can cause premature failure.

Both methods can produce accurate internal threads. Choose according to machine capability, thread geometry, production volume, cycle time, and cost per accepted part.

Find Suitable Threading Tools with STWANG

Contact STWANG with your thread specifications, workpiece material, machine type, and production requirements to discuss suitable tooling.

Contact STWANG

Further Reading